Yashica D resurrection

I found my uncle's old camera when sorting some old things, a Yashica D. It has been non-operational for the last 20 years, used mainly for projecting images through the viewfinder onto the ceiling with a flashlight. Now I started wondering if the camera could be used for photography again. The camera looked to be in a nice condition, but the shutter was stuck.

Kalle came to the rescue, armed with an excellent guide to disassembling the shutter on the Yashica D. We followed the guide, disassembled the shutter mechanism, and found that two shutter blades had stuck. We cleaned the blades and assembled the shutter again, and it worked!



While taking the camera appart, we had to unscrew a lens without damaging or scratching it. A bottle opener turned out to fit the lenses well and gave a suitably gentle but firm grip.



The shutter is designed in modules, with the self timer and the shutter speed regulator working as independent units. Each one is a kind of clockwork with several cogwheels in series. At one point we opened the wrong screw, and the shutter speed regulator came apart. Putting it back together again was a real challenge, as it contained several small wheels and springs. It was difficult to get all the pieces positioned correctly, so that the top cover could be put back on. What worked for us in the end was clamping a few pieces of cardboard to the desk, and to keep the timer module and its various parts in place with pins stuck into the cardboard.



I am very impressed by all the small mechanical parts in the shutter, especially considering that it all must have been designed without using computers. It was very pleasing when we got the camera put back together again, and to actually see it work. Kalle has already shot a couple of film rolls with it, here are a few samples.

The shutter disassembly guide by Dave Gauer was invaluable to us. We also found it useful to take photos of the parts in various stages of disassembly, in order to check the placing and orientation of the parts later when reassembling, and to keep the screws and small parts that came off in each step in a separate bowl.

Storage system for wrapping paper

Gift wrapping paper has always been a pain to store. Inspired by several similar arrangements on Pinterest, we made our own gift wrapping organization and storage system, on the inside of a clothes cabinet door.

For storing rolls of gift-wrapping paper, we used one of the (in Finland) ubiquitous Lanka & Muovi bathroom shelves, which consist of metal wire covered with a softer white plastic. We removed the lower parts of the two upper shelves with a wire cutter. The leftover wire stubs were smoothed down with a Dremel.



The result was two square ring-like supports over a deeper shelf, good for an almost infinite number of paper rolls!

Next, we used two Lanka & Muovi bars to make a holder for gift wrapping ribbon rolls. The bars (I really don't know what they're meant for in their original form) needed to be separated from the wall to make space for the ribbon rolls, we did this with some pieces of wood we had lying around.



We sawed off one end of the metal bars, and put in a hook for that end to rest on. This makes the ribbon rolls re-arrangeable without having to remove the entire thing!

Another bathroom shelf serves as storage for other gift-wrapping miscellanea: scissors, tape, gift bags, cards, markers...

Mixed Beads

Experimenting with colors while using up some old leftover Fimo polymer clay. I formed three piles of finely chopped clay, then mixed some of each color into the others. With some of the purple and blue, I re-chopped and mixed the finished chunks.

The pink turned a bit dull in the oven (thats a risk with leftovers) but the others turned out fine. The purple-blue re-chppped ones are probably the best of them.

Medicine Cabinet

Small not-too-clean medicine cabinet, found on a junk market in Tel Aviv.